Toyota 2002 Camry - Install Crankshaft Thrust Washer Upper; Install Crankshaft Bearing No.2; Install Crankshaft Bearing

A53029
A33379
A13501
A13502
–ENGINE MECHANICAL CYLINDER BLOCK (2AZ–FE)
14–133
1657Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
32. INSTALL CRANKSHAFT BEARING
(a) Install the upper bearing with an oil groove on cylinder
block.
NOTICE:
Clean the back side of the bearing and the bearing surface
of the cylinder block and let not stick the oils and fats.
33. INSTALL CRANKSHAFT BEARING NO.2
(a) Install the lower bearing on bearing cap.
NOTICE:
Clean the back side of the bearing and the bearing surface
of the bearing cap and let not stick the oils and fats.
34. INSTALL CRANKSHAFT THRUST WASHER UPPER
(a) Install the 2 thrust washers under the No. 3 journal posi-
tion of the cylinder block with the oil grooves facing out-
ward.
35. INSTALL CRANKSHAFT
(a) Apply engine oil to upper bearing and install the crank-
shaft on the cylinder block.
(b) Apply engine oil to lower bearing.
(c) Examine the front marks and install the bearing caps on
the cylinder block.
(d) Apply a light coat of engine oil on the threads and under
the bearing cap bolts.