C69639
C92858
SST
C69641
C92859
SST
41–64
–MANUAL TRANSMISSION/TRANSAXLE OUTPUT SHAFT ASSY (E351)
2194Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
4. INSPECT 2ND GEAR RADIAL CLEARANCE
(a) Using a dial indicator, measure the 2nd gear radial clear-
ance.
Standard clearance: mm (in.)
Bearing Standard clearance
KOYO made
0.009 – 0.053
(0.0004 – 0.0021)
NSK made
0.009 – 0.051
(0.0004 – 0.0020)
If the clearance is out of the specification, replace the 2nd gear
needle roller bearing.
5. REMOVE 4TH DRIVEN GEAR
(a) Using SST and a press, remove the output shaft bearing
rear (inner race) and 4th driven gear.
SST 09950–00020
6. REMOVE OUTPUT GEAR SPACER
(a) Remove the output gear spacer from the output shaft.
7. REMOVE 2ND GEAR
(a) Using SST and a press, remove the 3rd driven gear and
2nd gear from the out put shaft.
SST 09950–00020
To Next Page
Loading...
