Toyota 2002 Camry - Page 483

B53742
A
B
C
A
B
C
B53736
B53735
27–12
–REAR SUSPENSION REAR SUSPENSION ARM ASSY NO.1 LH
1945Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
12. INSTALL REAR SUSPENSION MEMBER SUB–ASSY
(a) Support the rear suspension member with a jack.
(b) Install the rear suspension member with the 4 nuts, 2 bolts
and 4 retainers.
Torque:
A, B: 55 N⋅m (561 kgf⋅cm, 41 ft⋅lbf)
C: 38 N⋅m (387 kgf⋅cm, 28 ft⋅lbf)
13. TEMPORARY TIGHTEN REAR SUSPENSION ARM
ASSY NO.1 LH
(a) Connect the rear suspension arm No. 1 (outer side) to the
rear axle carrier with the bolt and nut, and temporarily
tighten the bolt and nut.
HINT:
Insert the bolt from the front side of the vehicle and temporarily
install the bolt.
14. TEMPORARY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
15. TEMPORARY TIGHTEN REAR SUSPENSION ARM
ASSY NO.2 LH
(a) Connect the rear suspension arm No. 2 (outer side) to the
rear axle carrier with the bolt and nut, and temporarily
tighten the bolt.
HINT:
Insert the bolt from the rear side of the vehicle and temporarily
install the bolt.
16. TEMPORARY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
17. TEMPORARY TIGHTEN STRUT ROD ASSY REAR
(See page 27–19)