B56923
5 Clips
B56119
3 Claws
Pin
B56120
Clip
Claw
71–16
–INSTRUMENT PANEL/METER INSTRUMENT PANEL SAFETY PAD SUB–ASSY
2579Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
23. REMOVE INSTRUMENT CLUSTER FINISH PANEL
SUB–ASSY CENTER
(a) Remove the 4 bolts.
(b) Using a moulding remover, disengage 5 clips and remove
the instrument cluster finish panel sub–assy center with
radio receiver assy, then disconnect the connectors.
24. REMOVE INSTRUMENT PANEL UNDER COVER
SUB–ASSY NO.1
(a) Disengage the 3 claws and pin.
(b) Remove the instrument panel under cover sub–assy
No.1.
25. REMOVE GLOVE COMPARTMENT DOOR PAD
(a) Using a screwdriver, remove the glove compartment door pad.
HINT:
Tape the screwdriver tip, before use.
26. REMOVE INSTRUMENT PANEL SUB–ASSY LOWER
(a) TMC made:
Remove the bolt<D> and 4 screws <J>.
(b) TMMK made:
Remove the bolt<C> and 4 screws <G>.
(c) Disengage the claw, clip and remove the instrument panel
sub–assy lower.
27. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB–ASSY(M/T TRANSAXLE)