Toyota 2002 Camry - Page 1148

B57237
–SEAT FRONT SEAT (Manual Seat for TMC Made)
72–21
2610Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
11. REMOVE FRONT SEAT BACK ASSY
(a) Remove the hog rings at the lower portion of the seat back cover.
(b) w/ Side air bag:
Disconnect the wire harness of the side airbag from the seat cushion.
(c) Remove the 4 bolts and the front seat back assembly LH.
12. REMOVE RECLINING ADJUSTER KNOB
(a) Using a cloth or something, remove the snap rings and the reclining adjusting knob.
13. REMOVE SEPARATE TYPE FRONT SEAT BACK
COVER
(a) Turn up the cover.
(b) w/ Side airbag:
Using a screwdriver, disengage the seat back cover
bracket.
(c) Disengage the claws to remove the 2 headrest supports,
and then take away the front seat cover LH from the pad
spring.
(d) Remove the hog rings, and then take away the cover from
the pad.
14. REMOVE FRONT SEAT BACK HEATER ASSY LH (W/ SEAT HEATER)
(a) Cut off the tack pins which fasten the seat heater, and then remove the front seat back heater assembly
LH from the cushion cover.
NOTICE:
Be careful not to damage the seat cushion cover.
15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Disengage the hook, and remove the front seat cushion cover together with the front cushion spring.
(b) Remove the hog ring, and take away the front seat cushion cover from the front cushion pad.
16. REMOVE FRONT SEAT CUSHION HEATER ASSY LH (W/ SEAT HEATER)
(a) Cut off the tack pins which fasten the seat heater, and then remove the front seat heater assembly LH
from the seat cushion cover.
NOTICE:
Be careful not to damage the seat back cover.
17. REMOVE RECLINING ADJUSTER INSIDE COVER LH
(a) Remove the 2 screws and the reclining adjuster inside cover LH.
(b) Employ the same manner described above to the other side.
18. REMOVE RECLINING ADJUSTER INSIDE COVER RH
19. INSTALL FRONT SEAT CUSHION HEATER ASSY LH (W/ SEAT HEATER)
(a) Set the seat heater to the seat cushion cover.
(b) Install the front seat cusion heater assembly LH to the seat cushion cover with the 24 tack pins.
NOTICE:
Do not substitute other metal parts for tack pins.