B57311
B56955
Rubber
B57687
Rubber
72–24
–SEAT FRONT SEAT (Manual Seat for TMC Made)
2613Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) w/ Side airback:
Install the seat back cover bracket.
NOTICE:
For a vehicle with side airbag, the side airbag may not
activate normally unless the seat back cover is se-
curely installed.
Check that the strap has no twist after installing the
bracket.
23. INSTALL FRONT SEAT BACK ASSY
(a) Install the front seat back assembly with the 4 bolts.
Torque: 43 N⋅m (440 kgf⋅cm, 32 ft⋅lbf)
(b) As shown in the illustration, engage the rubber with a hole
of the front seat back frame with new hog rings.
(c) w/ Side airbag:
Install the wire harness and clamps of the side airbag
through the seat cushion cover end.
(d) Using hog ring pliers, install new hog rings.
NOTICE:
Be careful not to damage the cover.
When installing the hog rings, take care to prevent
wrinkles as little as possible.
24. INSTALL FRONT SEAT INNER BELT ASSY LH
(a) Install the front seat inner belt assembly LH with the bolt.
Torque: 42 N⋅m (420 kgf⋅cm, 31 ft⋅lbf)
To Next Page
Loading...
