760CB–01
B56421
Protective Tape
76–10
–EXTERIOR/INTERIOR TRIM REAR DOOR BELT MOULDING ASSY LH
2713Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REAR DOOR BELT MOULDING ASSY LH
REPLACEMENT
HINT:
Installation is in the reverse order of the removal. But the installation is indicated only when it has a
point.
In the RH side, work in the same procedure as in the LH side.
1. REMOVE REAR DOOR BELT MOULDING ASSY LH
(a) Put protective tape under the rear door belt moulding.
(b) Using a moulding remover or scraper, remove the rear
door belt moulding.
HINT:
Tape the scraper tip before use.
To Next Page
Loading...
