Toyota 2002 Camry - Page 128

–SERVICE SPECIFICATIONS ENGINE MECHANICAL
03–17
128Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
Crankshaft circle runout Maximum
Main journal diameter
Main journal taper and out–of–round Maximum
Crank pin diameter
Crank pin taper and out–of–round Maximum
0.06 mm (0.0024 in.)
60.988 – 61.000 mm (2.4011 – 2.4016 in.)
0.02 mm (0.0008 in.)
52.992 – 53.000 mm (2.0863 – 2.0866 in.)
0.02 mm (0.0008 in.)
Crankshaft oil clearance Standard No. 1 and No. 4 journals
No. 2 and No. 3 journals
Maximum No. 1 and No. 4 journals
No. 2 and No. 3 journals
0.014 – 0.034 mm (0.0006 – 0.0013 in.)
0.026 – 0.046 mm (0.0010 – 0.0018 in.)
0.05 mm (0.0020 in.)
0.06 mm (0.0024 in.)