B00347
WRONG
CORRECT
Delivery Pipe
New O–ring
Injector
A51878
Delivery Pipe
O–ring
Grommet
B09613
O–ring
Retainer Pipe
Nylon Tube
Housing
A50709
11–2
–FUEL FUEL SYSTEM (2AZ–FE)
1446Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(5) Put a container under the connection.
(b) Observe these precautions when removing and installing
the injector.
(1) Never reuse the O–ring.
(2) When placing a new O–ring on the injector, take
care not to damage it in any way.
(3) Coat a new O–ring with spindle oil or gasoline be-
fore installing. Never use engine, gear or brake oil.
(c) Install the injector to the delivery pipe and cylinder head,
as shown in the illustration. Before installing the injector,
be sure to apply spindle oil or gasoline on the place where
the delivery pipe touches O–ring of the injector.
(d) Observe these precautions when disconnecting the fuel
delivery pipe.
HINT:
The structure of the metallic connector is shown as left.
(1) Remove the fuel pipe clamp No.2.
To Next Page
Loading...
