Paint Mark
Timing Marks
A52456
53 1 2 4
Bearing Cap No. 1
Bearing Cap No. 3
A52457
Timing Mark
Paint Mark
A53011
A52473
13542
Bearing Cap No. 2 Bearing Cap No. 3
A52458
–ENGINE MECHANICAL VALVE CLEARANCE (2AZ–FE)
14–13
1535Author: Date:
(o) Install the timing chain on the camshaft timing gear, with
the painted links aligned with the timing marks on the
camshaft timing sprockets.
(p) Examine the front marks and numbers and tighten the
bolts in the order shown in the illustration.
Torque:
Bearing cap No. 1 30 N⋅m (301 kgf⋅cm, 22 ft⋅lbf)
Bearing cap No. 3 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
(q) Put the camshaft No.2 on the cylinder head with the
painted links of chain aligned with the timing mark on the
camshaft timing sprockets.
(r) Raising the camshaft, tighten the set bolt temporarily.
(s) Examine the from marks and numbers and tighten the
bolts in the sequence shown in the illustration.
Torque:
Bearing cap No. 2 30 N⋅m (301 kgf⋅cm, 22 ft⋅lbf)
Bearing cap No. 3 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
To Next Page
Loading...
