A62058
SST
Hooking Point
B12056
A00019
A13325
14–76
–ENGINE MECHANICAL CHAIN (2AZ–FE)
1600Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(2) Using SST, remove the crankshaft pulley.
SST 09950–40011 (09951–04010, 09952–04010,
09953–04030, 09954–04010, 09955–04041,
09957–04010, 91111–51014)
22. REMOVE CRANK POSITION SENSOR
23. REMOVE OIL PAN SUB–ASSY
(a) Remove the 12 bolts and 2 nuts.
(b) Insert the blade of SST between the crank case and oil
pan, cut off applied sealer and remove the oil pan.
SST 09032–00100
NOTICE:
Be careful not to damage the contact surface of the cylin-
der block and oil pan.
24. REMOVE CHAIN TENSIONER ASSY NO.1
(a) Remove the 2 nuts, timing chain tensioner and gasket.
NOTICE:
Be sure not to revolve the crankshaft without the chain ten-
sioner.
To Next Page
Loading...
