Toyota 2002 Camry - Page 379

A36739
16–22
–COOLING WATER PUMP ASSY (1MZ–FE)
1841Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
18. REMOVE WATER PUMP ASSY
(a) Remove the 4 bolts, 2 nuts and water pump assembly.
19. INSTALL WATER PUMP ASSY
(a) Install a new gasket and the water pump with the 4 bolts and 2 nuts.
Torque: 8 N⋅m (82 kgf⋅cm,
71 in.⋅lbf)
20. INSTALL TIMING BELT NO.3 COVER
(See page 14–212)
21. INSTALL CAMSHAFT TIMING PULLEY
(See page 14–212)
SST 09962–01000, 09963–01000), 09960–10010, 09249–63010
22. INSTALL TIMING BELT IDLER SUB–ASSY NO.2
Torque: 43 N⋅m (438 kgf⋅cm,
32 ft⋅lbf)
23. INSPECT TIMING BELT
(See page 14–206)
24. INSTALL TIMING BELT
(See page 14–243)
SST 09960–10010 (09962–01000, 09963–01000)
25. INSTALL CHAIN TENSIONER ASSY NO.1
(See page 14–206)
26. INSTALL TIMING BELT GUIDE NO.2
(See page 14–206)
27. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
Torque: 28 N⋅m (286 kgf⋅cm, 21 ft⋅lbf)
28. INSTALL TIMING BELT NO.2 COVER
(See page 14–206)
29. INSTALL TIMING BELT NO.1 COVER
(See page 14–206)
30. INSTALL CRANKSHAFT PULLEY
(See page 14–206)
SST 09213–54015 (91651–60855), 09330–00021
31. INSTALL GENERATOR BRACKET NO.2
Torque: 28 N⋅m (286 kgf⋅cm, 21 ft⋅lbf)
32. INSTALL ENGINE MOUNTING STAY NO.2 RH
(See page 14–155)
33. INSTALL ENGINE MOVING CONTROL ROD
(See page 14–155)
34. INSTALL VANE PUMP V BELT
(See page 14–140)