P20034
A32940
A51990
SST
A62376
A36784
17–14
–LUBRICATION OIL PUMP ASSY (1MZ–FE)
1860Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Using a screwdriver, remove the oil pan by prying the por-
tions between the cylinder block and oil pan.
NOTICE:
Be careful not to damage the contact surfaces of the cylin-
der block and oil pan.
34. REMOVE CRANK POSITION SENSOR
(a) Disconnect the crank position sensor connector.
(b) Remove the bolt and crank position sensor.
35. REMOVE OIL PUMP ASSY
(a) Remove the 9 bolts, O–ring and oil pump.
36. INSTALL OIL PUMP ASSY
(a) Using SST and a hammer, tap in a new oil seal until its sur-
face is flush with the oil pump body edge.
SST 09223–00010
NOTICE:
Be careful not to tap the oil seal slantingly.
(b) Apply a small amount of MP grease to the oil seal lip.
NOTICE:
Keep the lip off foreign materials.
(c) Apply engine oil to the O–ring.
(d) Install a new O–ring on the cylinder block.
To Next Page
Loading...
