Toyota 2002 Camry - Page 400

AB
AB
Region ”X” Region ”Y”
Seal Width
3 – 4 mm
Seal Packing
A52359
P12568
Seal Width
4 – 5 mm
Seal Packing
A52360
17–16
–LUBRICATION OIL PUMP ASSY (1MZ–FE)
1862Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
38. INSTALL OIL PAN SUB–ASSY
(a) Apply seal packing to the oil pan as shown in the illustra-
tion.
Seal packing: Part No. 08226–00080 or equivalent.
NOTICE:
 Remove any oil from the contact surface.
 Apply seal packing to the outer side of the bolt hole
in the region ”X”.
 Apply seal packing to the inner side of the bolt hole
in the region ”Y”.
 Install the oil pan within 3 minutes after applying seal
packing.
 Do not put into engine oil within 2 hours after instal-
ling.
(b) Install the oil pan with the 17 bolts and 2 nuts.
Torque:
10 mm head 8 N⋅m (82 kgf⋅cm,
71 in.⋅lbf)
12 mm head 20 N⋅m (199 kgf⋅cm,
14 ft⋅lbf)
39. INSTALL OIL STRAINER SUB–ASSY
(a) Install a new gasket and the oil strainer with the bolt and 2 nuts.
Torque: 8 N⋅m (82 kgf⋅cm,
71 in.⋅lbf)
40. INSTALL OIL PAN SUB–ASSY NO.2
(a) Apply seal packing to the oil pan as shown in the illustra-
tion.
Seal packing: Part No. 08226–00080 or equivalent.
NOTICE:
Apply seal packing to the inner side of the bolt hole.
(b) Install oil pan No. 2.
Torque: 8 N⋅m (82 kgf⋅cm,
71 in.⋅lbf)
NOTICE:
 Remove any oil from the contact surface.
 Do not put into engine oil within 2 hours after instal-
ling.