A33005
Marks
A51993
–LUBRICATION OIL PUMP ASSY (1MZ–FE)
17–21
1867Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(f) Inspect rotor side clearance.
(1) Using a feeler gauge and precision straight edge,
measure the clearance between the rotors and pre-
cision straight edge.
Standard side clearance:
0.03 – 0.09 mm (0.0012 – 0.0035 in.)
Maximum side clearance: 0.15 mm (0.0059 in.)
(g) Install oil pump rotor set.
(1) Apply a light coat of engine oil to the oil pump gear
set and place it into pump body with the marks fac-
ing the pump body cover side.
(h) Install oil pump cover.
(1) Install the 10 screws and oil pump cover.
Torque: 10 N⋅m (105 kgf⋅cm, 8 ft⋅lbf)
4. INSTALL OIL PUMP RELIEF VALVE
(a) Apply a light coat of engine oil to the relief valve, and insert the relief valve and spring into the pump
body hole.
(b) Install the oil pump relief valve plug.
Torque: 24 N⋅m (245 kgf⋅cm,
18 ft⋅lbf)
To Next Page
Loading...
