A60462
Terminal 50
Terminal 30
A32779
19–22
–STARTING & CHARGING STARTING SYSTEM (1MZ–FE)
1894Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(f) Connect the battery and ammeter to the starter as shown.
(g) Check that the starter rotates smoothly and steadily with
the pinion gear moving out. Check that the ammeter
shows the specified current.
Specified current: 90 A or less at 11.5 V
2. STARTER RELAY ASSY
(a) Inspect the relay continuity.
(1) Using an ohmmeter, check that there is continuity
between terminals 1 and 2.
If there is no continuity, replace the relay.
(2) Check that there is no continuity between terminals
3 and 5.
If there is continuity, replace the relay.
(b) Inspect the relay operation.
(1) Apply battery positive voltage across terminals 1
and 2.
(2) Using an ohmmeter, check that there is continuity
between terminals 3 and 5.
If there is no continuity, replace the relay.
To Next Page
Loading...
