C93541
A
B
B53738
C91816
27–18
–REAR SUSPENSION STABILIZER BAR REAR
1951Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
6. INSTALL STABILIZER BAR REAR
(a) Install the bushing and bracket with the 4 bolts (LH side).
Torque: 19 N⋅m (195 kgf⋅cm, 14 ft⋅lbf)
HINT:
2 types of bolts (A, B) are used, so make sure the correct
bolts are installed.
Install the bushing to the inner side of the bushing stopper
on the stabilizer bar.
7. INSTALL REAR STABILIZER LINK ASSY LH
(a) Remove the 2 nuts and stabilizer bar link.
Torque: 39 N⋅m (400 kgf⋅cm, 29 ft⋅lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (5 mm)
wrench to hold the stud.
8. INSTALL REAR STABILIZER LINK ASSY RH
HINT:
Install the RH side by the same procedures with the LH side.
9. INSTALL REAR WHEEL
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
To Next Page
Loading...
