F41005
SST
F41006
F41007
–BRAKE BRAKE FLUID
32–5
1993Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(e) Repeat the above procedure to bleed the air out of the
brake line for each wheel.
4. BLEED ABS & TRACTION ACTUATOR ASSY(W/ VSC)
(a) Remove the reservoir cap.
(b) Install SST to the reservoir.
SST 09992–00242, 09992–00350
(c) Connect the vinyl tube to the bleeder plug of the ABS &
TRACTION actuator.
(d) Using SST, apply the pressure described below to the res-
ervoir.
Pressure: 98.1 kPa (1.0 kgf/cm
2
, 14.2 psi)
(e) Loosen the bleeder plug.
(f) Bleed the air out of the ABS & TRACTION actuator, tight-
en the bleeder plug.
Torque: 8.3 N⋅m (85 kgf⋅cm, 74 in.⋅lbf)
5. CHECK FLUID LEVEL IN RESERVOIR
(a) Check the fluid level and add fluid if necessary.
Fluid: SAE J1703 or FMVSS No. 116 DOT3
To Next Page
Loading...
