F41703
Pad Wear Indicator Plate
Anti–Squeal
Shim No.2
Anti–Squeal
Shim No.2
Anti–Squeal Shim No.1
32–30
–BRAKE FRONT BRAKE
2018Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
37. INSTALL ANTI SQUEAL SHIM KIT FRONT
NOTICE:
When replacing worn pads, the anti–squeal shims
must be replaced together with the pads.
Install the shims and pad wear indicator plates cor-
rectly of which positions and directions.
(a) Apply disc brake grease to inside of each anti–squeal
shim No.1.
(b) Install the anti–squeal shim No.1 and No.2 on each pad.
(c) Install the pad wear indicator plate to the 2 pads.
38. INSTALL DISC BRAKE PAD KIT FRONT (PAD ONLY)
(a) Install the 2 pads with the pad wear indicator plate facing upward.
NOTICE:
There should be no oil or grease adhering to the friction surfaces of the pads and the disc.
39. INSTALL DISC BRAKE CYLINDER ASSY FR LH
(a) Install the disc brake cylinder with the 2 bolts.
Torque: 34 N⋅m (350 kgf⋅cm, 25 ft⋅lbf)
40. CONNECT FRONT FLEXIBLE HOSE
(a) Install a new gasket and flexible hose with the union bolt.
Torque: 29.4 N⋅m (300 kgf⋅cm, 22 ft⋅lbf)
HINT:
Gasket has 2 types: 2–piece type and 1–piece type.
Install the flexible hose lock securely in the lock hole in the disc brake cylinder.
41. FILL RESERVOIR WITH BRAKE FLUID
42. BLEED MASTER CYLINDER(See page 32–4)
SST 09023–00100
43. BLEED BRAKE LINE(See page 32–4)
44. CHECK FLUID LEVEL IN RESERVOIR
45. CHECK BRAKE FLUID LEAKAGE
46. INSTALL FRONT WHEEL
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
To Next Page
Loading...
