Toyota 2002 Camry - Page 586

C83035
32–60
–BRAKE SKID CONTROL SENSOR
2048Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
8. INSTALL REAR AXLE HUB & BEARING ASSY LH
(a) Install the rear axle hub & bearing assy with the 4 bolts.
Torque: 80 N⋅m (816 kgf⋅cm, 59 ft⋅lbf)
9. INSTALL REAR DISC
10. INSTALL REAR DISC BRAKE CALIPER ASSY, LH(See page 32–33)
11. CONNECT SKID CONTROL SENSOR WIRE
12. INSTALL REAR WHEEL
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
13. INSPECT TIRE(See page 27–3)
14. MEASURE VEHICLE HEIGHT(See page 27–3)
15. INSPECT SIDE SLIP(See page 27–3)
16. INSPECT CAMBER(See page 27–3)
17. INSPECT TOE–IN(See page 27–3)
18. ADJUST CAMBER AND TOE–IN(See page 27–3)
19. CHECK ABS SPEED SENSOR SIGNAL(See page 05–363, 05–404 or 05–452)