Toyota 2002 Camry - Page 632

C90567
C83204
C90565
C90566
–AUTOMATIC TRANSMISSION / TRANS AUTOMATIC TRANSAXLE ASSY (2AZ–FE)
40–19
2094Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
26. INSTALL STARTER ASSY
(a) Install the starter assy and 2 bolts.
Torque: 37 N⋅m (377 kgf⋅cm, 27 ft⋅lbf)
(b) Connect the connecter.
27. INSTALL WIRE HARNESS
(a) Install the wire harness and bolt.
Torque: 25.5 N⋅m (260 kgf⋅cm, 19 ft⋅lbf)
28. INSTALL WIRE HARNESS CLAMP
(a) Install the 2 clamps and 2 bolts.
Torque: 8.4 N⋅m (86 kgf⋅cm, 74 in.⋅lbf)
(b) Connect the wire harness to the clamps.
29. INSTALL TRANSMISSION CONTROL CABLE
BRACKET NO.2
(a) Install the transmission control cable bracket No.2 and
bolt.
Torque: 11.8 N⋅m (122 kgf⋅cm, 9 ft⋅lbf)
30. INSTALL FRONT DRIVE SHAFT ASSY LH
(See page 30–8)
31. INSTALL FRONT DRIVE SHAFT ASSY RH
(See page 30–8)
32. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE(See page 14–22)