D03636
C50009
D25591
D25674
C83111
–AUTOMATIC TRANSMISSION / TRANS TRANSMISSION WIRE
40–27
2102Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
6. INSTALL TRANSMISSION WIRE
(a) Coat a O–ring of the transmission wire connector with
ATF.
(b) Install the transmission wire.
(c) Install the bolt.
Torque: 5.4 N⋅m (55 kgf⋅cm, 48 in.⋅lbf)
7. CONNECT TRANSMISSION WIRE
(a) Coat a O–ring of the ATF temperature sensor with ATF.
(b) Install the ATF temperature sensor with the lock plate and
bolt.
Torque: 6.6 N⋅m (67 kgf⋅cm, 58 in.⋅lbf)
(c) Connect the 5 shift solenoid valve connectors.
8. INSTALL AUTOMATIC TRANSAXLE OIL PAN
SUB–ASSY
(a) Install the 2 magnets in the oil pan.
(b) Apply seal packing or equivalent to 18 bolts.
Seal packing:
THREE BOND 2430 or equivalent
(c) Install a new gasket, oil pan and 18 bolts to the transaxle
case.
Torque: 7.8 N⋅m (80 kgf⋅cm, 69 in.⋅lbf)
NOTICE:
Because the bolts should be seal bolts, apply seal packing
to bolts and tighten them within 10 minutes after applica-
tion.
To Next Page
Loading...
