Toyota 2002 Camry - Page 682

C90605
C90604
C92366
C92365
41–14
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY
2144Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
18. INSTALL STARTER ASSY
(a) Install the starter assy with the 2 bolts.
Torque: 37 N⋅m (377 kgf⋅cm, 27 ft⋅lbf)
19. INSTALL WIRE HARNESS CLAMP
(a) Install the wire harness clamps with the 2 bolts.
Torque: 8.0 N⋅m (82 kgf⋅cm, 71 in.⋅lbf)
20. INSTALL ENGINE WIRE NO.3
(a) Install the engine wire No. 3 with the bolt.
Torque: 25.5 N⋅m (260 kgf⋅cm, 19 ft⋅lbf)
21. CONNECT WIRE HARNESS
(a) Connect the wire harness clamp.
(b) Connect the back–up lamp switch connector and starter
connector.
22. INSTALL FRONT DRIVE SHAFT ASSY LH
(See page 30–8)
23. INSTALL FRONT DRIVE SHAFT ASSY RH
(See page 30–8)
24. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE(See page 14–22)