C69516
C69269
C69270
C69777
SST
SST
C69454
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
41–19
2149Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
19. INSPECT 5TH GEAR RADIAL CLEARANCE
(a) Using a dial indicator, inspect the 5th gear radial clear-
ance.
Standard clearance:
0.009 – 0.050 mm (0.0004 – 0.0020 in.)
HINT:
If the clearance is out of the specification, replace 1st gear
needle roller bearing.
20. REMOVE TRANSMISSION CLUTCH HUB NO.3
(a) Using 2 screwdrivers and hammer, remove the transmis-
sion clutch hub No.3 shaft snap ring from the input shaft.
HINT:
Using a waste to prevent the snap ring from being scattered.
(b) Remove the gear shift fork bolt from the gear shift fork
No.3.
(c) Using SST, remove the transmission clutch hub No.3 and
gear shift fork No.3 from the input shaft.
SST 09950–30012 (09951–03010, 09953–03010,
09954–03010), 09950–50013 (09957–04010),
09950–60010 (09951–00280)
21. REMOVE 5TH GEAR
(a) Remove the 5th gear from the input shaft.
To Next Page
Loading...
