C83227
C83226
C87996
SST
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
41–37
2167Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Install the 14 bolts and manual transmission case to the
manual transaxle case.
Torque: 29 N⋅m (296 kgf⋅cm, 21 ft⋅lbf)
(c) Install the 3 bolts and front manual transaxle case side.
Torque: 30 N⋅m (306 kgf⋅cm, 22 ft⋅lbf)
(d) Turn the differential case in both directions to make it
smooth.
(e) Using SST and torque wrench, inspect preload.
SST 09564–32011
Preload: N⋅m ( kgf⋅cm, in.⋅lbf)
Bearing Torque
New 0.8 – 1.6 (8.16 – 16.32, 7.1 – 14.2)
Used 0.5 – 1.0 (5.10 – 10.2, 4.4 – 8.9)
If the preload is out of the specification, select the front differen-
tial case shim RR and adjust it.
HINT:
The preload of the front differential case shim RR varies in
torque from about 0.04 to 0.06 N⋅m is one size.
Shim: mm (in.)
Part No. Thickness Mark
90564–56055 2.00 (0.0787) 0
90564–56056 2.05 (0.0807) 1
90564–56057 2.10 (0.0827) 2
90564–56058 2.15 (0.0846) 3
90564–56059 2.20 (0.0866) 4
90564–56060 2.25 (0.0886) 5
90564–56061 2.30 (0.0906) 6
90564–56062 2.35 (0.0925) 7
90564–56063 2.40 (0.0945) 8
90564–56064 2.45 (0.0965) 9
90564–56065 2.50 (0.0984) A
90564–56066 2.55 (0.1004) B
90564–56067 2.60 (0.1024) C
90564–56068 2.65 (0.1043) D
90564–56069 2.70 (0.1063) E
90564–56070 2.75 (0.1083) F
To Next Page
Loading...
