C87998
SST
C83243
C83242
C83241
C83240
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
41–39
2169Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
78. INSTALL INPUT SHAFT FRONT BEARING
(a) Coat the input shaft front bearing with gear oil, install it to
the manual transaxle case.
SST 09950–60010 (09951–00570), 09950–70010
(09951–07150)
Clearance: 4.28 – 4.60 mm (0.1685 – 0.1811 in.)
79. INSTALL MANUAL TRANSAXLE CASE RECEIVER
(a) Install the 3 bolts and manual transaxle case receiver to
the manual transaxle case.
Torque: 7.0 N⋅m (71 kgf⋅cm, 62 in.⋅lbf)
80. INSTALL DIFFERENTIAL CASE ASSY
(a) Coat the differential case taper roller bearing with gear oil,
install the differential case assy to the manual transaxle
case.
81. INSTALL OUTPUT SHAFT ASSY
(a) Apply gear oil to each sliding part of the output shaft assy.
(b) Lift the differential case assy up with the output shaft assy
leaned, and install it to the manual transaxle case.
82. INSTALL INPUT SHAFT ASSY
(a) Apply gear oil to each sliding part of the input shaft assy.
(b) With the output shaft assy leaned, install the input shaft
assy to the manual transaxle case.
To Next Page
Loading...
