Toyota 2002 Camry - Page 711

C70521
C83815
C69465
C69755
C83227
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
41–43
2173Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Coat the reverse restrict pin plug with adhesive 1324, us-
ing hexagon wrench (6mm), install the manual transmis-
sion case.
Torque: 13 N⋅m (133 kgf⋅cm, 9.6 ft⋅lbf)
93. INSTALL OIL RECEIVER PIPE NO.1 (MTM)
(a) Install the bolt and oil receiver pipe No.1 (MTM) to the
manual transmission case.
Torque: 17 N⋅m (173 kgf⋅cm, 13 ft⋅lbf)
HINT:
Tighten the oil receiver pipe No.1 with the bolt.
94. INSTALL OIL RECEIVER PIPE NO.2 (MTM)
(a) Install the bolt and oil receiver pipe No.2 (MTM) to the
manual transmission case.
Torque: 17 N⋅m (173 kgf⋅cm, 13 ft⋅lbf)
HINT:
Tighten the oil receiver pipe No.2 (MTM) with the bolt while
manual transmission case is being put.
95. INSTALL MANUAL TRANSMISSION CASE
(a) Apply FIPG bead condition sequentially to the position
shown in the diagram of the manual transmission case.
HINT:
Install within 10 minutes after applying FIPG.
(b) Install the manual transmission case and 14 bolts to the
manual transaxle case.
Torque: 29 N⋅m (296 kgf⋅cm, 21 ft⋅lbf)