Toyota 2002 Camry - Page 740

C92864
SST
SST
C92865
SST
SST
C69639
C69638
41–72
–MANUAL TRANSMISSION/TRANSAXLE OUTPUT SHAFT ASSY (E351)
2202Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
39. INSTALL 4TH DRIVEN GEAR
(a) Using SST and a press, install the 4th driven gear to the
output shaft.
SST 09608–00071, 09950–60010 (09951–00320),
09950–70010 (09951–07100)
40. INSTALL OUTPUT SHAFT FRONT BEARING
(a) Using SST and a press, install the output shaft front bear-
ing (inner race) to the output shaft.
SST 09506–30012, 09950–60010 (09951–00320),
09950–70010 (09951–07100)
41. INSPECT 2ND GEAR RADIAL CLEARANCE
(a) Using a dial indicator, measure the 2nd gear radial clear-
ance.
Standard clearance: mm (in.)
Bearing Standard clearance
KOYO made
0.009 – 0.053
(0.0004 – 0.0021)
NSK made
0.009 – 0.051
(0.0004 – 0.0020)
If the clearance is out of the specification, replace the 2nd gear
needle roller bearing.
42. INSPECT 1ST GEAR RADIAL CLEARANCE
(a) Using a dial indicator, measure the 1st gear radial clear-
ance.
Standard clearance: mm (in.)
Bearing Standard clearance
KOYO made
0.009 – 0.053
(0.0004 – 0.0021)
NSK made
0.009 – 0.051
(0.0004 – 0.0020)
If the clearance is out of the specification, replace the 1st gear
needle roller bearing.