C69667
C92884
SST
C92885
SST
C92886
C69540
–MANUAL TRANSMISSION/TRANSAXLE SHIFT & SELECT LEVER SHAFT ASSY (E351)
41–77
2207Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
11. REMOVE CONTROL SHAFT COVER OIL SEAL
(a) Using a screwdriver, remove the control shaft cover oil
seal from the control shaft cover.
12. REMOVE CONTROL SHAFT COVER BIMETAL
FORMED BUSH
(a) Using SST, remove the control shaft cover bimetal formed
bush from the control shift cover.
SST 09319–60020
13. INSTALL CONTROL SHAFT COVER BIMETAL
FORMED BUSH
(a) Using SST and hammer, install a new control shaft cover
bimetal formed bush to the control shaft cover.
SST 09950–60010 (09951–00210), 09950–70010
(09951–07100)
Oil seal drive in depth:
0 0.25 mm (0 0.010 in.)
14. INSTALL CONTROL SHAFT COVER OIL SEAL
(a) Using SST and hammer, install a new control shaft cover
oil seal to the control shaft cover.
SST 09950–60010 (09951–00280), 09950–70010
(09951–07100)
Oil seal drive in depth:
28.5 0.50 mm (1.122 0.020 in.)
15. INSTALL SELECT SPRING NO.1 SEAT SHAFT SNAP
RING
(a) Using a brass bar and a hammer, install the select spring
No.1 seat shaft snap ring.
To Next Page
Loading...
