C92887
SST
C83564
C83565
C83566
C68517
41–82
–MANUAL TRANSMISSION/TRANSAXLE DIFFERENTIAL CASE ASSY (E351)
2212Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
4. REMOVE FRONT DIFFERENTIAL PINION SHAFT
STRAIGHT PIN
(a) Using SST and a hammer, unstake the stacked part of the
front differential case.
SST 09930–00010
(b) Using a pin punch and a hammer, remove the front differ-
ential pinion shaft straight pin from the front differential
case.
5. REMOVE FRONT DIFFERENTIAL PINION SHAFT
NO.1
(a) Remove the front differential pinion shaft No.1 to the front
differential case.
6. REMOVE FRONT DIFFERENTIAL SIDE GEAR
(a) Remove the 2 front differential pinions, 2 front differential
pinion thrust washers, 2 front differential side gear and 2
front differential side gear thrust washers from the front
differential case.
HINT:
Revolving front differential pinion, remove the 2 pinion thrust
washers and side gear thrust washers.
7. INSPECT FRONT DIFFERENTIAL PINION THRUST
WASHER
(a) Using a micrometer, measure the thickness of the front
differential pinion thrust washer.
Minimum thickness: 0.9 mm (0.035 in.)
If the thickness smaller than the minimum, replace the front dif-
ferential pinion thrust washer.
To Next Page
Loading...
