42–8
–CLUTCH CLUTCH PEDAL SUB–ASSY
2223Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(4) Gradually depress the clutch pedal and measure
the stroke distance from the point that the gear
noise stops (release point) up to the full stroke end
position.
Standard distance: 25 mm (0.98 in.) or more
(From pedal stroke end position to release point)
If the distance is not as specified, perform the following opera-
tions.
Check pedal height.
Check push rod play and pedal free play.
Bleed the clutch line.
Check the clutch cover assy and disc assy.
To Next Page
Loading...
