C92310
C90603
SSTMatchmarks
C92273
C90585
50–10
–STEERING COLUMN STEERING COLUMN ASSY (TMC MADE)
2245Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
CAUTION:
When storing the horn button assy, keep the upper
surface of the horn button assy facing upward.
Never disassemble the horn button assy.
9. REMOVE STEERING WHEEL ASSY
(a) Disconnect the connector.
(b) Remove the steering wheel assy set nut.
(c) Place matchmarks on the steering wheel assy and main
shaft assy.
(d) Using SST, remove the steering wheel assy.
SST 09950–50013 (09951–05010, 09952–05010,
09953–05020, 09954–05021)
10. REMOVE INSTRUMENT CLUSTER FINISH PANEL
(See page 71–12)
11. REMOVE STEERING COLUMN COVER
(a) Remove the 2 screws and steering column cover.
12. DISCONNECT FLOOR SHIFT PARKING LOCK CABLE
ASSY
(a) Using a screwdriver, disconnect the floor shift parking lock
cable from the upper bracket.
13. REMOVE SPIRAL CABLE SUB–ASSY
(See page 60–25)
14. REMOVE HEADLAMP DIMMER SWITCH ASSY
(a) Disconnect the connector and remove the headlamp dimmer switch assy.