C92274
A
B
C90585
C92273
50–18
–STEERING COLUMN STEERING COLUMN ASSY (TMC MADE)
2253Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Tighten the bolt A.
Torque: 35.3 N⋅m (360 kgf⋅cm, 26 ft⋅lbf)
(d) Install the steering column hole cover No. 2 to the steering
hole cover No.1.
(e) Connect the clamp to the steering column hole cover
No.1 and tighten the bolt B.
50. INSTALL WINDSHIELD WIPER SWITCH ASSY
(a) Install the windshield wiper switch assy and connect the connector.
51. INSTALL HEADLAMP DIMMER SWITCH ASSY
(a) Install the headlamp dimmer switch assy and connect the connector.
52. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
53. INSTALL SPIRAL CABLE SUB–ASSY
(See page 60–25)
54. CONNECT FLOOR SHIFT PARKING LOCK CABLE
ASSY
(a) Turn the ignition switch to ACC or ON.
(b) Connect the cable to the upper bracket.
55. CHECK KEY INTERLOCK OPERATION(See page 40–37)
56. INSTALL STEERING COLUMN COVER
(a) Install the steering column cover with the 2 screws.
57. INSTALL INSTRUMENT CLUSTER FINISH PANEL
58. INSTALL HEATER TO FOOT DUCT NO.3
To Next Page
Loading...
