C92656
474.5 1 mm (18.681 0.039 in.)
C92361
Matchmarks
C92305
F40352
Matchmarks
50–28
–STEERING COLUMN STEERING COLUMN ASSY (TMMK MADE)
2263Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
39. INSPECT STEERING COLUMN ASSY
(a) Measure the length of steering main shaft.
Standard length: 474.5 1 mm (18.681 0.039 in.)
40. INSTALL STEERING INTERMEDIATE SHAFT ASSY
(a) Align the matchmark with the one on the steering inter-
mediate shaft sub–assy and steering main shaft assy.
(b) Temporarily install the steering intermediate shaft sub–
assy with the bolt.
41. INSTALL STEERING COLUMN ASSY
(a) Install the steering column assy with the 3 bolts.
Torque: 20.6 N⋅m (210 kgf⋅cm, 15 ft⋅lbf)
(b) Connect the connectors and wire harness clamps.
42. CONNECT STEERING INTERMEDIATE SHAFT ASSY
(a) Align the matchmarks on the intermediate shaft sub–assy
and steering gear assy.
(b) Install the steering intermediate shaft sub–assy with the
bolt.
Torque: 35.3 N⋅m (360 kgf⋅cm, 26 ft⋅lbf)
To Next Page
Loading...
