Toyota 2002 Camry - Page 823

F41600
SST
C65312
51–18
–POWER STEERING VANE PUMP ASSY (1MZ–FE)
2285Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
10. REMOVE VANE PUMP PULLEY(TYPE A VANE PUMP)
(a) Using SST, stop the vane pump pulley rotation and loosen
the nut.
SST 09960–10010 (09962–01000, 09963–01000)
(b) Remove the nut and vane pump pulley from the vane
pump shaft.
11. REMOVE POWER STEERING SUCTION PORT UNION
(a) Remove the bolt and power steering suction port union.
(b) Remove the O–ring from the power steering suction port union.
12. REMOVE PRESSURE PORT UNION
(a) Remove the pressure port union.
(b) Remove the O–ring from the pressure port union.
13. REMOVE FLOW CONTROL VALVE
14. REMOVE FLOW CONTROL VALVE COMPRESSION SPRING
15. REMOVE VANE PUMP BRACKET REAR(TYPE A VANE PUMP)
(a) Remove the 2 bolts, vane pump bracket rear from the vane pump assy.
16. REMOVE VANE PUMP BRACKET REAR(TYPE B VANE PUMP)
(a) Remove the 2 bolts and 2 nuts, vane pump bracket rear from the vane pump assy.
17. REMOVE VANE PUMP HOUSING REAR
(a) Remove the 4 bolts and vane pump housing rear from the vane pump housing front.
(b) Remove the gasket.
(c) Remove the 2 O–rings from the vane pump housing rear.
18. REMOVE VANE PUMP SIDE PLATE REAR
(a) Remove the wave washer from the vane pump side plate rear.
(b) Remove the vane pump side plate rear.
19. REMOVE VANE PUMP CAM RING
20. REMOVE VANE PUMP ROTOR
(a) Remove the 10 vane pump plates from the vane pump ro-
tor.
(b) Using a screwdriver, remove the vane pump shaft snap
ring from the vane pump shaft.
(c) Remove the vane pump rotor.
21. REMOVE VANE PUMP SHAFT(TYPE A VANE PUMP)
22. REMOVE W/PULLEY SHAFT SUB–ASSY(TYPE B VANE PUMP)