N00372
Height
Thickness
Length
R10282
Feeler Gauge
R11288
F41490
F41529
Sport Grade:
Except Sport Grade:
51–20
–POWER STEERING VANE PUMP ASSY (1MZ–FE)
2287Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
26. INSPECT VANE PUMP ROTOR AND VANE PUMP
PLATES
(a) Using a micrometer, measure the height, thickness and
length of the vane pump plates.
Minimum height: 8.7 mm (0.343 in.)
Minimum thickness: 1.4 mm (0.055 in.)
Minimum length: 14.991 mm (0.59020 in.)
(b) Using a feeler gauge, measure the clearance between
the vane pump rotor groove and vane pump plate.
Maximum clearance: 0.03 mm (0.0012 in.)
If it is more than the maximum, replace the vane pump assy.
27. INSPECT FLOW CONTROL VALVE
(a) Coat the flow control valve with power steering fluid and
check that it falls smoothly into the flow control valve hole
by its own weight.
To Next Page
Loading...
