C83179
Wire
Cylinder End
Stopper
F40542
SST
ZX9355
51–36
–POWER STEERING RACK & PINION POWER STEERING GEAR ASSY
2303Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
33. REMOVE CYLINDER END STOPPER
(a) Using a screwdriver and a hammer, turn the cylinder end
stopper clockwise until the wire end is visible through the
service hole.
(b) Using a screwdriver and a hammer, turn the cylinder end
stopper counterclockwise, and remove the wire and cylin-
der end stopper.
34. REMOVE POWER STEERING RACK
35. REMOVE POWER STEERING RACK BUSH
(a) Remove the power steering rack bush from the power
steering rack.
(b) Using SST, remove the rack bush oil seal.
SST 09527–21011, 09612–24014 (09613–22011)
(c) Using a screwdriver, remove the O–ring from the power
steering rack bush.
36. INSPECT POWER STEERING RACK
(a) Using a dial indicator, check the power steering rack for
runout and for teeth wear and damage.
Maximum runout: 0.3 mm (0.012 in.)
(b) Check the back surface for wear and damage.
To Next Page
Loading...
