H01584
Slider
Slider
Disconnection is completed
H01585
Slider
Slider
60–6
–SUPPLEMENTAL RESTRAINT SYSTEM SUPPLEMENTAL RESTRAINT SYSTEM
2389Author: Date:
2. DISCONNECTION OF CONNECTOR FRONT SEAT AIRBAG ASSY
(a) Place a finger on the slider.
(b) Slide the slider to release lock.
(c) Disconnect the connector.
3. CONNECTION OF CONNECTOR FOR FRONT SEAT AIRBAG ASSY
(a) Align a lock part of male connector and a slider of female connector in the same direction as shown
in the illustration, fit in them without rubbing.
(b) Be sure to insert until they are locked. After fitting in pull them slightly to check that they are locked.
(When locked, make sure that the outer returns to its original position and sound at the time of fitting
in can be heard.)
HINT:
As the slider slides, do not touch it.
Be careful not to deform the release board. If the release board is deformed, replace it with a new one.
To Next Page
Loading...
