Toyota 2002 Camry - Page 943

H40005
SST
Battery
H41413
SST
SST
4 Spoke Steering Wheel Assy:
3 Spoke Steering Wheel Assy:
H40176
Weight
X
Y
Y
60–22
–SUPPLEMENTAL RESTRAINT SYSTEM HORN BUTTON ASSY
2405Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
NOTICE:
The disc wheel will be marked by the airbag deployment,
so when disposing of the airbag use a redundant disc
wheel.
(c) Check functioning of the SST (See step 1–(a)).
(d) Install the SST.
CAUTION:
Place the disc wheel on the level ground.
(1) Connect the connector of the SST.
SST 09082–00700
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the disc
wheel.
(2) Move the SST to at least 10 m (33 ft) away from the
horn button assy tied down on the disc wheel.
(e) Cover the horn button assy with a cardboard box or tires.
 Covering method using a cardboard box:
Cover the horn button assy with the cardboard box
and weight the cardboard box down in 4 places with
at least 190 N (20 kg, 44 lb).
Size of cardboard box:
Must exceed the following dimensions:
X = 460 mm (18.11 in.)
Y = 650 mm (25.59 in.)
NOTICE:
 When dimension Y of the cardboard box exceeds the
diameter of the disc wheel with tire to which the horn
button assy is tied, X should be the following size.
X = 460 mm (18.11 in.) + width of tire