Technical Specifications
B-3
Appendix B
Technical Specifications
Reader Specifications
Communications
Frequency Selection 860 to 930 MHz capable
Reading Range Read performance varies depending on tag,
reader, and externa
l antenna (if required) config-
uration and environment.
Optimum read range
using the eGo
®
Plus Sticker Tag is 24.3 ft (7.4
m).
Typical read range should be 12 to 17 ft (3.7 to
5.2
m).
a
a. Reading range depends on reader or external antenna configu-
ration, tag type, tag read mode, and operating environment.
Hardware Features
Integrated System
and/or integrated sys-
tem with connector for
exte
rnal antenna
RF module, tag decoder, external antenna (if
required),
power supply, I/O ports, and serial
communications interface all housed in a single
package.
Case Weatherproof enclosure. The system is
sealed in
a tamper-proof, polycarbonate housing.
Power Requirements
Input Voltage 16 to 20V AC, 47 to 63 Hz
or
16 to 28V DC
Physical Attributes
Size 15.5 x 15.5 x 3.25 in (39.4 x 39.4 x 8.25 cm)
To Next Page
Loading...
