Introduction
1-7
object to be tracked adds its programmed identification information to the signal and
reflects the signal back to the Encompass 4 Reader System. The Encompass 4 Reader
System receives this modified, or modulated signal, and decodes the tag data carried
by the reflected signal and transmits this data to a local host computer for processing.
Licensing Requirements
An FCC license provides the user with the legal authorization to operate the Encom-
pass 4 on the licensed frequencies at the site specified in the license. Only an autho-
rized installer or service technician can set the RF frequency of the Encompass 4
Reader System to the frequency specified in the FCC site license.
The FCC license may provide the user with protection and authorization to maintain
the system should any other RFID product be used in the licensed area after the
Encompass 4 equipment is installed.
Users of the Encompass 4 Reader System in the United States must obtain a license
from the FCC. In the United States, the authorized modulated frequency band for this
product is 911.75 to 919.75 MHz and the authorized continuous wave frequency band
is 902.25 to 903.75 MHz and 910.00 to 921.50 MHz.
The user is responsible for filing the FCC license according to FCC regulations, but
the TransCore dealer will provide assistance and support as necessary to complete
these forms. Forms are available online at the FCC internet site www.fcc.gov/Forms/
Form601/601.html or you can file online at wireless.fcc.gov/index.htm?job=online_
-
filing. For further information on obtaining the license contact TransCore.
Technical Support
Authorized dealers and distributors are responsible for the direct support of all
customers. Authorized dealers and distributors needing technical support can contact:
Technical Support
Phone: (505) 856-8007
Web: transcore.com/rfidsupport
Please be prepared to answer a series of questions that are designed to direct you to the
best support resource available.
To Next Page
Loading...
