Encompass 4 Reader System Guide
D-4
Uniqueness timeout 2 minutes 441
Wiegand mode Disabled 450
Tag translation mode Disabled 452
Multi-tag sort Disabled 454
eGo or eGo Plus Tag initialization
during multi-tag sort
Enabled 456
Second alternate group select Disabled 458
Wiegand transmit mode 1 second 4601
Third alternate group select Disabled 490
Fourth alternate group select Disabled 492
Fifth alternate group select Disabled 494
Alternate group select Disabled 496
Reader ID number 00 6000
Communications protocol Basic 610
Error correcting protocol (ECP)
timeout
12.7 sec 612FE
Flow control Software (XON/XOFF) 6141
Echo mode Enabled 6171
Set output control Turn off both outputs 6200
Sense output control Predefined 621
RF-by-input control Enabled 641
ATA operating range Maximum 6431F
RF attenuation Full power 64400
eGo or eGo Plus operating range Maximum 6451F
Sense output pulse duration 228 ms 67C
Synchronization output delay time Disabled 64800
Synchronization hold off time Disabled 64900
Presence without tag reports Disabled 6900
RF-off control Timeout or no presence 6922
Table D-1 Encompass 4 Reader Default Configuration Settings (continued)
Parameter Setting Command
To Next Page
Loading...
