Sending Functions
ADVANCED OPERATION GUIDE 2-31
Enter E-mail Subject and Body
When sending E-mail, enter the subject and body of the E-mail.
1
Press the Send key.
2
Press [Advanced Setup] and then [E-mail Subject/Body].
3
Press [Subject].
4
Enter the subject, and press [OK].
NOTE: Up to 60 characters are available for the subject.
5
Press [Body].
6
Enter the body and press [OK].
NOTE: Up to 500 characters are available for the body.
7
Press [OK].
8
Specify the destination, and press the Start key to start sending.
Status 10/5/2006 10:10
Ready to send.
Destination
Add Shortcut
Subject
Cancel OK
Body
E-mail Subject/Body
Enter Destination.
1
Press [OK] to display
the image.
To Next Page
Loading...
Need help?
General
