Copying Functions
1-38 ADVANCED OPERATION GUIDE
Page Numbering
Number multiple pages of originals in sequential order. The formats for
numbering include [- 1 -], [P.1] or [1/n]. The format [1/n] prints the total
number of pages in the place of n.
The page number is centered at the bottom of the page.
1
Place the originals in the document processor or on the platen with the top
edge facing either the rear or the left side of the machine.
2
Press the Copy key.
3
Press [Layout/Edit] and then [Page #].
4
Select the
numbering format
from [- 1 -], [P.1] or
[1/n].
5
To start page numbering from a page other than the first page, press [+] or
[–] of 1st Page and select the starting page. You can also enter the number
with the numeric keys after pressing [# Keys].
6
To start the numbering with a number other than 1, press [+] or [–] of Start
Number and enter the starting number. You can also enter the number with
the numeric keys after pressing [# Keys].
7
To specify the page to end numbering, press [Last Page] and select
[Manual]. Press [+] or [–] to enter the ending page and press [OK]. You can
also enter the number with the numeric keys after pressing [# Keys].
Original [ – 1 –] [P.1] [1/n]
Status 10/5/2006 10:10
Ready to copy.
Copies
Cancel OK
Page #
Press [OK] to display
Add Shortcut
1st Page
None
1/n
(1 - 10)
Start # (1 - 999)
# Keys
# Keys
Top Edge Top
Original
Orientation
P.1
Auto
Denominator
#
-1-
Auto
Last Page
1
1
1
the image.
To Next Page
Loading...
Need help?
General
