Utax CD 1230 User Manual

Copying Functions
1-58 ADVANCED OPERATION GUIDE
2
Press [Call] and
press the key
corresponding to the
program number (1
to 50) to recall.
Press [No.] to enter
the program number
directly for recalling.
NOTE: If the program cannot be recalled, the document box or the form
overlay specified in the program might have been deleted. Check the
document box.
3
Place the originals and press the Start key. Copying is performed
according to the registered program.
Editing and Deleting Programs
You can change program number and program name, or delete program.
1
Press the Program key.
2
Press [Edit] and press the key(s) corresponding to the program number (1
to 50) to change or delete.
3
To edit, change the program number and program name using the same
steps as registration and press [Register]. Choose [Yes] in the confirmation
screen to change the program.
To delete the
program, press
[Delete this
Program]. Choose
[Yes] in the
confirmation screen
to delete the
program.
Program
01
02
03
04
05
06
07
08
09
10
No.
Cal l Register Edit
Status 10/5/2006 10:10
Program Detail:
No. Name:Change Change
Delete this Progr am Cancel
Status
10/5/2006 10:10
Register
01 2 in 1

Utax CD 1230 Specifications

General

Brand	Utax
Model	CD 1230
Category	All in One Printer
Language	English