Printer
ADVANCED OPERATION GUIDE 3-3
Serial Interface
The serial interface can be mounted as an option. Select each item
according to the serial interface of the computer.
*: Default setting
1
Press the System Menu Key.
2
Press [System],
[Change] of Serial,
[Change] of Baud
Rate and the key of
Baud Rate you want.
3
Press [OK].
4
In the same way as Steps 2 and 3, set data bits, stop bits, parity and
protocol.
5
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power off and on.
Item Value
Baud Rate 1,200 bps, 2,400 bps, 4,800 bps, 9,600 bps*,
19,200 bps, 38,400 bps, 57,600 bps, 115,200
bps
Data Bits 7 bits, 8 bits*
Stop Bits 1 bits*, 2 bits
Parity Not use*, Odd, Even, Ignore
Protocol DTR (positive), &XOn/XOff*, DTR (positive),
DTR (negative), XOn/XOff, ETX/ACK
Status
System - Baud Rate
Set Baud rate for the serial interface.
2400bps
Cancel OK
1200bps 4800bps 9600bps
115200bps57600bps38400bps
19200bps
10/5/2006 10:10
To Next Page
Loading...
Need help?
General
