Management
ADVANCED OPERATION GUIDE 7-17
3
If user login administration is invalid, the user authentication screen is
displayed. Enter a login user name and password, and press [Login]. By
default, the login user name and password are 5050 respectively.
4
Press [Next] of Job Accounting Setting, [Next] of Default Setting and then
[Change] of Apply Limit.
5
Select [Immediately], [Subsequently], or [Alert Only].
6
Press [OK].
Counting the Number of Pages Printed
This counts the number of pages printed. Counts are classified into Total
Job Accounting and Each Job Accounting. A new count can also be started
after resetting the count data which was stored for a certain period of time.
Types of the counts are as follows.
Total Job Accounting/Resetting the Counter
This counts the number of pages for all accounts and resets the counts for
those accounts at one time.
1
Press the System Menu key.
Item Description
Print Pages (by
Function)
• When Split is selected for Managing the Copy/
Print Count:
Number of pages copied, printed, faxed*, and
the total number of those pages are displayed.
• When Total is selected for Managing the Copy/
Print Count:
Number of pages printed (by copier and printer),
number of pages faxed*, and the total number of
those pages are displayed.
* Only if optional fax kit is installed
Print Pages (1 or
2 sided)**
** Only available for Total Job Accounting
Number of pages for 1 sided, 2 sided, as well as
the total pages are displayed.
Scan Pages Number of pages scanned for copier, other
function, as well as the total pages are displayed
Fax
Transmission
Page*
Number of fax pages sent is displayed.
Fax
Transmission
Time*
Total duration of Fax transmission is displayed.
To Next Page
Loading...
Need help?
General
