Utax CD 1230

System Menu
ADVANCED OPERATION GUIDE 6-65
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Time Zone.
3
Select the location
and press [OK].
NOTE: Press [S] or [T] to select the location.
Date Format
Select the display format of year, month, and date.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Date Format.
3
Select [MM/DD/
YYYY], [DD/MM/
YYYY], or [YYYY/
MM/DD] and press
[OK].
Auto Panel Reset
If no job runs for a certain period of time, automatically reset settings and
return to the default setting.
NOTE: Refer to page 6-20 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Date/Timer - Time Zone
Set time zone.
Please select the location nearest y ou.
Time Zone
-12:00 Eniwetok
1/13
Cancel OK
Status 10/5/2006 10:10
-11:00 Midway Is
-10:00 Hawaii
-09:00 Alaska
-08:00 Pfic Time
-07:00 Arizona
Date/Time - Date Format
Cancel OK
Status 10/5/2006 10:10
Set the date and time display for mat.
DD/MM/YYYYMM/DD/YYYY YYYY/MM/DD