Printer
3-4 ADVANCED OPERATION GUIDE
Emulation
Select the emulation for operating this machine by the command for other
printers.
Selection of emulation
The printer emulates Line Printer, IBM Proprinter, DIABLO 630, EPSON
LQ- 850, PCL 6, KC-GL, KPDL, and KPDL (Auto).
1
Press the System Menu Key.
2
Press [Printer],
[Change] of
Emulation and then
the key of emulation
you want.
NOTE: When you have selected [KPDL (Auto)], select the following
alternative emulation, too.
When you have selected [KPDL] or [KPDL (Auto)], set KPDL Error Report,
too. (Refer to page 3-5)
When you have selected [KC-GL], set the print size and pen, too. (Refer to
page 3-6)
3
Press [OK].
4
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power off and on.
Setting of Alternative Emulation
When you have selected [KPDL (Auto)] as emulation mode, you can switch
KPDL and another emulation mode (alternative emulation) automatically
according to the data to print. The alternative emulation you can set is [Line
Printer], [IBM Proprinter], [DIABLO 630], [EPSON LQ- 850], [PCL 6]*, and
[KC-GL] (*: Default setting).
1
Press the System Menu Key.
Status 10/5/2006 10:10
Printer - Emulation
Set emulation options.
Cancel OK
PCL6
IBM
Proprinter
DIABLO 630 EPSON
LQ-850
Line Printer
KPDL KPDL(Auto) KC-GL
To Next Page
Loading...
Need help?
General
