Utax CD 1230

System Menu
6-66 ADVANCED OPERATION GUIDE
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Auto Panel Reset.
3
Press [Off] or [On].
4
Press [OK].
Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait
before Auto Panel Reset. Options are between 5 and 495 seconds (every
five seconds).
NOTE: If you select [Off] for Auto Panel Reset, the time display does not
appear.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Reset Timer.
3
Press [+] or [–] to
enter the time until
Auto Panel Reset is
turned on.
4
Press [OK].
Auto Sleep
If no job runs for a certain period of time, automatically enter Sleep Mode.
Refer to Chapter 3 of the Operation Guide for Sleep Mode.
Date/Timer - Auto Panel Reset
Cancel OK
Status 10/5/2006 10:10
Automaticall y reset settings and retur n to
default screen.
On
Off
Date/Timer - Reset Timer
Cancel OK
Status 10/5/2006 10:10
Set the amount of time to wait before automatic pa nel reset.
Use [-]/[+] to enter a number.
(5 - 495)
sec.